|
Overview Provides independent, constant-current control of two LED loads at up to 4amps continuous DC or a maximum output power of 60 Watts per channel. In Pulse (Strobe) Mode, the ULC-2 is capable of output currents up to 40 amps. The ULC-2 is capable of driving LED forward voltages between 3V and 20V. Pulsewidths are adjustable down to 2 microseconds and external trigger rates up to 50kHz. Uses and Applications: This unit is a comprehensive control device built for compatibility with standard LED illumination systems. For continuous, intensity, and strobing control with programmability for preset parameters, trigger delay, and pulse variation via user-friendly LCD or using Ethernet commands. Features:
Universal LED Controller
Model#: ULC-2
Easy To Use Control User-friendly LCD front panel display with keypad or the ULC-2 can be embedded into custom applications using the ULC-2 instruction set or the included MetaBoss software Wiring Diagram *Please refer to the diagram below for LED output and trigger input connections. The ULC-2 shall be powered by a user-supplied power supply having the following ratings: • 24VDC • 6A • Switching power supply preferred • To minimize rise-time distortion and guarantee pulsewidth values, keep all LED load wires as short as possible. ULC-2 Trigger Inputs • For external trigger operation, each channel provides separate trigger inputs. Trigger pulses enable the LED output for a period set by the Pulsewidth parameter. ULC-2 LED Outputs • With the ULC-2 un-powered, connect channel 1 & 2 LED loads to the positive and negative LED outputs.
Please call Metaphase at 215-639-8699 or your local representative for any additional information. File Cabinet
|
|||||||||||||||||||||||||||||||||||||||||||||||
.jpg)
