MB-LL106
High Power Line Light 2"
Features:
- High Uniformity both laterally and longitudinally
- High Intensity, over 1 million Lux
- Lens Options for various beam widths and working distances
- Cooling Options include convection, fans, compressed air with and without Computer air flow control, etc
- Available in various Light wavelengths including IR, UV and RGB
- Strobe synchronization; Control compatibility for high precision pulse-modulation and 0-10V Intensity Control capability
- Adjustable lens focusing range of mm to meters
- Backlight versions for web backlight & silhouetting applications
- From 1” to 120” (10ft) in length
- Built-in constant current driver(s) provides consistent illumination output
- 24V version require no special controllers; simply provide 24VDC
Applications Include:
- Web Inspection (Foil, Plastic Film, PCBs, glass, paper, web converting, etc)
- Geometry measurements of long targets
- Direct Position measurement
- Printed circuit board inspection
- Tube or bottle inspection
- Quality control in food, chemicals and textile industry
- Detection of holes in high transparent films
- and laminated glass
- Nonwovens
- Fabrics
- Solar Cells
Model#: MB-LL106-[ ]-24
| Power Source |
24VDC |
| Current Draw (max) |
0.7 amp |
| Cable |
10 foot / (3.05 m) cable with flying leads |
| Housing |
Aluminum |
| Operating Conditions |
-30 °C to 60 °C
|
| Cooling |
Fan (see options below)
|
Lifetime Expectancy
|
75,000 hours |
| CE conformity |
Yes |
| Inline Dimmer Part # |
ILD-25-24-L |
Fill in the set of brackets [ ] with corresponding wavelength code* from the table below (or use our Model Number Specification wizard at the bottom of the page):
| Designator |
[Code]
|
Wavelength (nanometers) |
| Red |
|
R
|
630nm |
| Green |
|
G
|
530nm |
| Blue |
|
B
|
455nm |
| Infrared |
|
IR
|
850nm |
| UV (long) |
|
UVL
|
395nm |
| UV (short) |
|
UVS
|
365nm |
| White (Cool White) |
|
W
|
6000° Kelvin / Highest Intensity |
| RGB |
|
|
|
RGB
|
625nm / 530nm / 470nm
(3 die packaging technology) |
* Choice of wavelength may effect price and delivery time.
* Please contact your Metaphase representative for information regarding wavelengths that do not appear above.
Add a dash and the corresponding lens code to the end of the model number from the table below (or use our Model Number Specification wizard at the bottom of the page):
| Designator |
Code
|
| Longer Focal Lens |
LL |
Add a dash and the corresponding lens code to the end of the model number from the table below (or use our Model Number Specification wizard at the bottom of the page):
| Designator |
Code
|
| No Fan |
NF |
| CoolPack |
CP |
Replace designator "LL" with "BLL" on the prefix of the model number for units deployed in transmissive imaging applications (or use our Model Number Specification wizard at the bottom of the page)
IP (Ingress Protection) Rated Options
Please contact Metaphase or your local representative for information regarding IP rated versions of this light for harsh environments (water, dust, etc).
.jpg)
