SSI-20DC-2
Dual Channel Current-Controlled DC Power Supply
Model#: SSI-20DC-2
| Electrical Specifications: |
Output Current:
|
1.2A ( per channel ) |
Compliance Voltage ( @1.2A per channel ):
|
11VDC |
Voltage Control (for intensity adjustment):
|
Two ranges 0-5V and 0-10V (user selectable) |
| Voltage control input impedance: |
20K ohm |
| Maximum input voltage: |
+20V, -10V |
| Voltage control input cutoff frequency: |
5 Hz |
| Input Voltage: |
85-264VAC(auto-ranging), 47-63 Hz |
| Power Consumption: |
Less than 70 Watts |
| Operating Temp. Range: |
0 to 40 deg. C |
| Storage Temp. Range: |
-20 to 85 deg. C |
| Output Protection: |
Resettable fuse for short across output
terminals ( or ( + ) output to ground )
|
| Front Panel |
Intensity Knob:
|
(2)Ten-turn potentiometer for intensity ( current ) adjustment
|
Intensity Control Internal / External Switch:
|
Allows the intensity to be controlled from the front panel knob or from a voltage supplied to I/O connector on the rear panel |
Range Select Switch:
|
Allows the external control voltage range to be set to 0-5V or 0-10V |
| Rear Panel |
Control Voltage Range Select Switch:
|
Allows the external control voltage range to be set to 0-5V or 0-10V |
I/O Connector:
|
9 Pin D-subminiature used for control voltage
Input |
| Output Connectors: |
(2) 15 Pin D-subminiature ( one per channel ) |
| Fuse: |
(2) 5 x 20 mm, 3A, 250V |
| Dimensions: |
L(6”) x W(6”) x H(4”)
|
* Data and specifications are subject to change without notice.
Please contact Metaphase Technologies at
215-639-8699 for more information. |
