600 kHz FastTrig

600kHz high-speed multiplexing UL line light device

About the 600 kHz FastTrig

Metaphase’s 600kHz FastTrig is the highest rate driver in the industry. By partnering with line scan camera manufactures, our illuminators can be synchronized with the industry’s fastest line scan cameras. The FastTrig driver allows high-speed switching between either multiple wavelengths or illumination techniques at rates high enough to capture synchronized images on a scan-line per scan-line basis. Typical applications of high-speed line scan multiplexing include combinations of front and backlighting or alternating between different wavelengths like infrared and visible. A FastTrig equipped light can accept up to a 600kHz trigger rate.

 

Line scan camera setup with front and backlight diagram

Showing Front Light / Backlight Multiplexing

Timing diagram of front/back light and camera shutter

Showing Triggering Sequence for Front Light / Backlight Multiplexing

Line scan camera setup with front light and monitor

Showing RGB Multiplexing

Digital timing diagram with multicolored signal waveforms

Showing Triggering Sequence for Front Light / Backlight Multiplexing

600kHz LED illumination line light products display

Showing RGB Multiplexing

SPECIFICATIONS
Minimum ON-time: 1.5µs (pending duty cycle)
Ripple: ±5%
On-time delay: 500ns max.
Trigger rate: Up to 600kHz
Driver type: Internal/Built-in or Integrated In-Line
TYPICAL WIRING
Brown 24VDC
Blue Ground (24V RTN)
Orange 0-10V Intensity Control
Yellow Trigger, NPN: Falling
Red Trigger, PNP: Rising
Black Signal Ground

All products, images, and company names are trademarks™ or registered® trademarks of their respective holders.
Use of them does not imply any affiliation with or endorsement by them

Request Information About 600 kHz FastTrig

This field is for validation purposes and should be left unchanged.
Name(Required)