The Metabright™ series Area Backlight is a high performance and uniform light source for silhouetting and transmissive applications. Using a Full Array LED layout, we can pack more LEDs per square inch to provide greater intensity, uniformity and performance. The Metabright™ Area Backlight Series is available with a wide variety of LED colors and sizes including White, Red, Green, Blue, IR, UVS, UVL and RGB with independent color control and with active areas ranging from 1”x1” (25mm x 25mm) to custom order sizes of 5’ x 5’ (1.5m x 1.5m).
Typical Backlight Configuration
|Power Source:||24VDC +/-5%|
|Cable (Standard):||10-foot cable with flying leads|
|Housing:||Black Anodized Aluminum|
|Ambient Temp:||-20°C to 40°C|
|Lifetime Expectancy:||75,000 hours (except UV)|
DRIVER & STROBE OPTIONS
• 24v – Our most popular configuration for use with a standard 24v constant voltage power supply
• ILS – Configured for Strobing applications with Power Boost for increased Intensity for Rising and Falling Edge Triggers
• Keyence – Compatibility with Keyence Light controllers such as the Keyence CA-DC21E
• Baumer – Compatibility with Baumer VeriSens Cameras
• Cognex – Compatibility with Cognex Cameras
Please call Metaphase at 215-639-8699 or your local representative for any additional information.
IP (Ingress Protection) Rated
Please contact Metaphase or your local representative for information regarding
IP rated versions of this light for harsh environments (water, dust, etc).