Thin Backlights:
The Thin Backlight Series is a high performance and uniform light source for silhouetting and transmissive applications. With a housing thickness of less than 11mm and edge-to-edge lighting, the thin backlight series helps maximize illumination area in tight spaces. Using a Full Array LED layout, we can pack more LEDs per square inch to provide greater intensity, uniformity and performance. The Thin Backlight Series is available with a wide variety of LED colors and sizes including White, Red, Green, Blue, IR, UVS and UVL with active areas ranging from 1”x1” (25mm x 25mm) to 5”x10” (127mm x 254mm).
| SPECIFICATIONS: | |
| Power Source: | 24VDC +/-5% |
| Cable (Standard): | 10-foot cable with flying leads |
| Housing: | Black Anodized Aluminum |
| Ambient Temp: | -20°C to 40°C |
| Lifetime Expectancy: | 75,000 hours (except UV) |
|
DRIVER & STROBE OPTIONS • 24v – Our most popular configuration for use with a standard 24v constant voltage power supply • ILS – Configured for Strobing applications with Power Boost for increased Intensity for Rising and Falling Edge Triggers • Keyence – Compatibility with Keyence Light controllers such as the Keyence CA-DC21E • Baumer – Compatibility with Baumer VeriSens Cameras • Cognex – Compatibility with Cognex Cameras Please call Metaphase at 215-639-8699 or your local representative for any additional information. |
IP (Ingress Protection) Rated
Please contact Metaphase or your local representative for information regarding
IP rated versions of this light for harsh environments (water, dust, etc).
