This is a Metaphase Classic product. Please confirm availability with your Metaphase Sales Rep at Sales@metaphase-tech.com, before specifying, quoting, or ordering. We have a variety of current machine vision products that can be found here.
Dual Channel Current-Controlled DC Power Supply
|Compliance Voltage (@2.4A):||18VDC|
|Voltage Control (for intensity adjustment):||Two ranges 0-5V and 0-10V (user selectable)|
|Voltage control input impedance:||20K ohm|
|Maximum input voltage:||+20V, -10V|
|Voltage control input cutoff frequency:||5 Hz|
|Input Voltage:||85-264VAC(auto-ranging), 47-63 Hz|
|Power Consumption:||Less than 100 Watts|
|Operating Temp. Range:||0 to 40 deg. C|
|Storage Temp. Range:||-20 to 85 deg. C|
|Output Protection:||Resettable fuse for short across output terminals (or (+) output to ground)|
|Intensity Knob:||Ten-turn potentiometer for intensity (current) adjustment|
|Intensity Control Internal / External Switch:||Allows the intensity to be controlled from the front panel knob or from a voltage supplied to I/O connector on the rear panel|
|Range Select Switch:||Allows the external control voltage range to be set to 0-5V or 0-10V|
|I/O Connector:||9 Pin D-subminiature used for control voltage input|
|Output Connectors:||15 Pin D-subminiature (one per channel)|
|Fuse:||(2) 5 x 20 mm, 3A, 250V|
L(6”) x W(6”) x H(4”)
* Data and specifications are subject to change without notice.
Please call Metaphase at 215-639-8699 or your local representative for any additional information.