SSI-40DC
This is a Metaphase Classic product. Please confirm availability with your Metaphase Sales Rep at Sales@metaphase-tech.com, before specifying, quoting, or ordering. We have a variety of current machine vision products that can be found here.
Single Channel Current-Controlled DC Power Supply
| ELECTRICAL SPECIFICATIONS: | |
| Output Current: | 2.4A |
| Compliance Voltage (@2.4A): | 18VDC |
| Voltage Control (for intensity adjustment): | Two ranges 0-5V and 0-10V (user selectable) |
| Voltage control input impedance: | 20K ohm |
| Maximum input voltage: | +20V, -10V |
| Voltage control input cutoff frequency: | 5 Hz |
| Input Voltage: | 85-264VAC(auto-ranging), 47-63 Hz |
| Power Consumption: | Less than 100 Watts |
| Operating Temp. Range: | 0 to 40 deg. C |
| Storage Temp. Range: | -20 to 85 deg. C |
| Output Protection: | Resettable fuse for short across output terminals or from either terminal to ground |
| FRONT PANEL | |
| Intensity Knob: | Ten-turn potentiometer for intensity ( current ) adjustment |
| Intensity Control Internal / External Switch: | Allows the intensity to be controlled from the front panel knob or from a voltage supplied to I/O connector on the rear panel |
| Range Select Switch: | Allows the external control voltage range to be set to 0-5V or 0-10V |
| REAR PANEL | |
| I/O Connector: | 9 Pin D-subminiature used for control voltage Input |
| Output Connectors: | 15 Pin D-subminiature |
| Fuse: | (2) 5 x 20 mm, 3A, 250V |
Dimensions:
L(6”) x W(6”) x H(4”)
* Data and specifications are subject to change without notice.
Please call Metaphase at 215-639-8699 or your local representative for any additional information.
