Border Patrol Light:
The Metaphase Border Patrol Light is a customized version of our Law Enforcement Light. The BPL is designed with many features for surveillance and security checkpoint monitoring. The BPL has two separate LED arrays that can be selected with different color LED’s including Infrared. The Border Patrol Light features a weatherproof enclosure with a powder coated hood. Other features include an adjustable beam angle for one LED section. Strobe pulse widths are adjustable from 2µs to 250µs with pulse rates up to 50kHz. Strobe controls include intensity, strobe rate, trigger delay, etc. Integrated mounting hardware is included to assist with installation in virtually any environment. The Border Patrol Light can be triggered remotely via a camera’s strobe output signal. Our thermal management technology assures an ultra-fast recharge to allow the strobe to fire at rates up to 50kHz for high-speed digital photography or video.
|Supply Voltage||24VDC ±10%, 6 amp switching power supply recommended|
|Voltage||3V to 24V|
|Current||7mA typical, 10mA max|
|Pulse width||2us minimum, 250µs maximum|
|Edge/Polarity|| Rising or Falling Edge (Strobe Mode)
High or Low-Level On (DC Current Mode)
|Ethernet Control:||UDP messaging listening on port 5000 for any incoming source port|
|IP Address||User selectable. Defaults to 172.16.1.1|
|Operating Modes||Strobe (Pulse), DC Current|
|Expected Lifetime||75,000 hours|
|Mounting||Pelco style swivel base|
|Operating Temperature||-34°C to 48.8°C (-29°F to 120°F)|
|Operating Humidity||0% to 85% RH non-condensing|
|IP Rating||IP66 (NEMA 4X enclosure)|
|SAMPLE PART NUMBER|
DIRECT CONNECTION COMPATIBILITY
We offer our lights with many different driver configurations to make the lights compatible with the latest vision cameras.
This provides greater flexibility, control, and convenience when integrating Metaphase illumination systems.