Law Enforcement Light:
The Law Enforcement Light can be triggered remotely via a camera’s strobe output signal. Our thermal management technology assures an ultra-fast recharge to allow the strobe to fire at rates up to 50kHz for high-speed digital photography or video use. The Law Enforcement Light is available in Narrow beam, suitable for monitoring one traffic lane at 100 feet or Wide beam, suitable for monitoring four traffic lanes at 40 feet. Custom beam widths are available.
|Supply Voltage||24VDC ±10%, 6 amp switching power supply recommended|
|Voltage||3V to 24V|
|Current||7mA typical, 10mA max|
|Pulse width||2µs minimum, 250µs maximum|
|Edge/Polarity|| Rising or Falling Edge (Strobe Mode)
High or Low-Level On (DC Current Mode)
|Ethernet Control:||UDP messaging listening on port 5000 for any incoming source port|
|IP Address||User selectable. Defaults to 172.16.1.1|
|Operating Modes||Strobe (Pulse), DC Current, DC Voltage|
|Expected Lifetime||75,000 hours|
|Mounting||Pelco style swivel base|
|Operating Temperature||-34°C to 48.8°C (-29°F to 120°F)|
|Operating Humidity||0% to 85% RH non-condensing|
|IP Rating||IP66 (NEMA 4X enclosure)|
|Weight||6.8 pounds (3.08kg)|
|SAMPLE PART NUMBER|
DIRECT CONNECTION COMPATIBILITY
We offer our lights with many different driver configurations to make the lights compatible with the latest vision cameras.
This provides greater flexibility, control, and convenience when integrating Metaphase illumination systems.