TX Barlight
- Application Type: Front light, mutispectral
- Wavelength: R, G, B, W, RGB, UV365, UV395, IR850, IR940, SWIR (6 wavelengths)
- Control: Standard driver allows light to be used continuous AND with follow-me strobe (8x power)
- Mounting: Flexible form factor, multiple wavelengths, and variable controls provide endless application options
- Footprint: 300mm length (daisy-chain up to 6); narrow footprint: 32mm wide x 49mm high
Available Wavelengths
Ordering Information
| FAMILY | MODEL | - | LENGTH | - | COLOR | - | DRIVER | - | POLARIZATION | - | LENS | - | DIFFUSER |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TXBR | XX | XX | XXXXX | X | XXX | XXX | XX | ||||||
| 1A (Single Connector) 2A (Dual Connector) | 12 (12 x 25 mm sections) | W (White 6000K) R (Red 630nm) G (Green 530nm) B (Blue 470nm) IR850 (Infrared 850nm IR940 (IR940) IR05 (SWIR 1050) IR20 (SWIR 1200) IR30 (SWIR 1300) IR45 (SWIR 1450) IR55 (SWIR 1550) IR65 (SWIR 1650) UV36 (UV 365nm) UV39 (UV 395nm) | Blank for Default (24VDC with follow-me trigger) - U External Drive | Blank for no polarizer P0 P90 | NL (No Lens) L20 (20deg nominal) L35 (35deg nominal) L45 (45deg nominal) | Blank for Default CC (clear cover) D2 (single matte) D4 (milky) D5 (opal replacement) |
Example Part Number: TXBR1A-12-W-L20 (TX barlight, one connector, 300mm length, white, 20degree total angle lens, with Clear cover)
Note 1: Model 1A has a single connector; Model 2A has two connectors. Both are available in either Standandard (Default) or -U Versions (See Note 4).
Note 2: (24VDC with follow-me trigger) or -U versions (ULC-2 compatible)
Note 3: Contact Metaphase Support for color combinations and other wavelengths.
Note 4: Standard Versions (Default) have 24VDC with built-in follow-me strobe with 5-pin, M12 A-code connector(s). External Drive Versions (-U) have 4-pin, M12 T code connector(s).
Note 5: P0 polarizer perpendicular to heat sink; P90 polarizer parallel to heat sink.
Note 6: Lens options available only for visible wavelengths.
Note 7: CC (clear cover) is the default for visible if lens selected, and for UV and SWIR. D2 (single matte) is default for visible if no lens selected. Lead times may be extended for non-default diffusers.